Need help! Post for acramatic 2100 using with unigraphics!

[mrtckrc]

Hi, everyone!
I'm using Unigraphics NX4 and I need an appropriate running post file for "Cincinnati Milacron CNC machine having acramatic 2100 controller" immediately.
At first, I tried to make it by using post builder program of unigraphics but unfortunately it did not work properly.
is there anyone having the same CNC machine and using unigraphics?
if it is possible can a get a copy of post file?
thanks for everyone.

MRTCKRC
Mech. Msc. Eng.
TURKEY

[timoty]

I have experience writting postprocessors for UG. Maybe I can help. Can you send me exact name of CNC and conrol at timoty@hot.ee.

[camster]

Have you looked at the UG Posts available from the UGS web site?
They have a library of posts available for download - free - http://support.ugs.com/

Click Download - and enter your web key - IF you don't have a webkey you can get one there also - need you sold to ID. This is only available to licensed users only.

[timoty]

Dear Camster have you ever tried this posts? I have. And I have to say they don’t work. You have to rewrite them and customize them.

[mrtckrc]

thanks for everyone for their interest

I solved the post file problem. I downloaded the required post file from ug posts library web site,mentioned by camster, and it was worked partially well. As timoty said, "minor" customizations were necessary.