Mastercam post for Fanuc 16iMB control - CNCzone.com-The Largest Machinist Community on the net!

blazekka · #1 07-13-2006, 09:00 AM

Hi Guys,

Looking to see if someone happens to have a pp for a Fanuc 16iMB control. Its on a Kitamura HX300iF horizontal mill.

Also, does anyone happen know what the difference can be between the 16i to the 18i ? Is it internal memory etc? Or is there something else that is very similar?

Any help would be greatly appreciated.

Thanks guys..
blazekka

DacSjc · #2 10-21-2006, 03:52 PM

i have a kit pallet and need a post for mastercam 7 any luck your end?

blazekka · #3 10-23-2006, 06:29 AM

Hi,

Sorry, but no luck at the moment. Keep ya posted. Thanks.

Steve Arteman · #4 12-06-2006, 03:31 AM

Blazekka,
I sent you a pm. let me know if I can help

Mike Mattera · #5 01-26-2007, 08:56 AM

There is a Fanuc Horizontal post on our Rotary Contouring & Indexing Training CD. The CD even discussed how to modify the post for different output. Visit the web site for more info.

Mike Mattera

timoty · #6 02-01-2007, 08:49 AM

If you can't do the modifications by yourself. I can do it

timoty@hot.ee

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)