Brother TC-228 Post (any software)

[h_2_o]

does anyone have a post any processor for the brother TC-228?


thanks

[lakeside]

I took this off of bobcad suppost and are you looking for tc-22a or tc-228

[h_2_o]

thanks for the quick reply, however i dont think that post will work. that seems to output gcode and the controller on the 228 (afaik) accepts motion programs/conversational programs which dont look anything like g-code. however i could be all wet and just havn't got the controller completely down yet.

[lakeside]

see if the controller will accept stander EIA for G-M code most al controller will read it or maybe stamder ISO format

[Ben Colby]

I have TC-221 and it only accepts the conversational programming. I have seen Brother machines that do accept EIA/ISO (G code) programs, but I'm fairly certain
that this is an option. Do a web search and contact Yamazen via email or phone
with your machine serial number and they may be able to tell you whether you have
g-code capability. If your machine is pre-1990 they may be very little help at all.

For what software are you looking for a post?
Can you send and receive programs via RS-232 and if so, what software are you
using?

Good luck
Ben

[louis14]

Thank you

[louis14]

I need to Know about CNC brother TC-20A and TC-203C Tapping Center
use a program format G-code and post by SolidCAM can be use

[wmyerscnc]

Many of the old Brother Converstional machines can be converted to run G-Code. The machine's control panel, and several IC chips on the NCPCB need to be replaced. Parts will typically cost around a couple thousand bucks, and take a few hours to install by a technician.
Contact Yamazen:
877-271-1933

[Stephan77]

We are developing a G-Code to Brother Conversational Converter at the moment. We are still using something like this in our company. The converter is able to convert any simple G-Code to a brother motion program.
Please contact info@aqua-computer.de if you are interested in this.

[louis14]

Thank you

[Ben Colby]

Hello,

I've sent a couple of emails to your email link and have received no response.
Is the g-code to brother motion control converter software available?
I would really like to try it and buy it if it's what you say it is.

Thanks
Ben

[louis14]

My email is l_ouis14@yahoo.com please tell me Title and you name on email
i don't know why my email not response and Thank you agant
Ben