Teksoft Procam Post for Heidenhain 2500 control

[RMARCH]

Hi ,

Does Anyone have a good working Teksoft Procam Post Processor for the Heidenhain TNC2500 control . The post i have does not do arcs and circles right .

Thanks
Ray

[got_woody]

Hi, I am new to this. I have been a cnc machinist for 12 years. I know procam (Teksoft) very well. I just got a Brigeport EZ-Trac and need a post processor for it I cant find one anywere. Dose anyone have one Please!! my email is got_woody@yahoo.com. my biggest problem is trying to do arcs there is no were to put the tool Dia, and if you add half the tool size or subtract it dose not come out right? if any one can help that would be great thanks got_woody

[RMARCH]

Hi,

I was wondering if someone could help me out.
My problem is when my Procam2000 generates a program it does not input The X, Y Value of the CC of the arc when one of the axises stays the same as the previous arc.

So my control gives me an error.

Example:

0 BEGIN PGM 0001 INCH
1 TOOL DEF 1 L+0 R.25
2 TOOL CALL 1 Z S3000
3 L X-.3169 Y+.6908 RL F3999 M03
4 L Z+.1 R0 F3999 M
5 L Z-.27 R0 F200 M
6 CC X+0. Y+.52
7 C X+.3169 Y+.6908 DR- RL F100 M
8 CC Y+0.
9 C X+.6908 Y+.3169 DR- RL F100 M
10 CC X+.52
11 C X+.6908 Y-.3169 DR- RL F100 M
12 CC X+0.
13 C X+.3169 Y-.6908 DR- RL F100 M
14 CC Y-.52
15 C X-.3169 Y-.6908 DR- RL F100 M
16 CC Y+0.
17 C X-.6908 Y-.3169 DR- RL F100 M
18 CC X-.52
19 C X-.6908 Y+.3169 DR- RL F100 M
20 CC X+0.
21 C X-.3169 Y+.6908 DR- RL F100 M
22 L Z+.1 R0 F3999 M
23 STOP M25
24 STOP M02
25 END PGM 0001 INCH



Thanks
Ray