Post to Haas from wildfire

[protogregg]

We just received 2 new Haas mills, and one of our programmers uses Wildfire 2.0, and I am trying to find out how to get it to post to the VF2's. If anyone can tell me where to start with getting Pro/E to post, any help would be great. By the way, I do not use Wildfire (SurfCAM only), so it takes me a bit to work through their menus. Thanks in advance.

[ty1295]

Wilfire/ProE is a CAD software and doesn't include a way to post. Purely for modeling.

They do sell a module, at one time was called pro manufacturing name may have changed not sure.

[protogregg]

We have pro/manufacuture (or pro/nc, whatever they call it now) and we have post programs specifically written (for pro/man) for the other mills in the shop (a couple of old Zimmerman's, a Hermle, and a Maho 430 controller), and I am trying to find out how to work my way through the pro/man to post to the Haas controller. The rest of us use SurfCAM, which has a very easy post config utility, and I wish the Pro/Man had the same type of post config options; or if it does, where to find them and how to use them.

[qmas99]

I think there is on post for Haas in Gpost folder, use NC post processor (Opion File Generator) to modify the post

[sohail abbas]

Hi Guys

Let me know the, what you want to do and i assur you that i can solve your every problem.
i have 5 years of experience to making the post customized.

Sohail Abbas