MasterCam V9.0 SP1 for Acramatic 2100

[Clawsie Machine]

Does anyone out there have a post for this. I have the original post I got from the original owner, but having some "issues". Would just like to compare a "CORRECT" post with mine.
Some of the problems is it WILL NOT travel down in Z in a contour toolpath with "RAMP" selected. It will just continue to travel around the surface.
There is also some problems the original owner claimed when tapping, so I haven't even tried to tap anything on the machine.

Thanks in advance, John

Machine is a Cinci Arrow 500

[post_guy]

MPA2100E.pst - It is included in the additional post processor installation contained in the original installation cd.

[ObrienDave]

Do you still need a post?
I have one for the Cincinnati Arrow 1000 that I modified.
You would have to modify the PEOF section to suit your machine.
Rigid tapping works.
It supports fixture offsets H1 thru H32.
Let me know and I will post it here.

[Clawsie Machine]

Dave, thanks. Sent a PM to you. John

[BUD B]

I am looking for a mastercam x post for a Cincinnati Arrow 1000 mill and falcon lathe were can I find one.

[nirmal_arulraj]

hi friends,
i am Nirmal.I need a help that is i need a post processor file for sinumeric 810D in mastercam v9.1 Any kind hearted friend help me to get the file.My email id is nirmal_arulraj@yahoo.com.thank u friends