I have a general question about post processors files. I have seen different numbers i.e. 1.3, 1.4 etc.
What does the i.e. |+1,3] , |1.0] do in the format lines?
Is there some type of reference table that explains the use of these?
Many thanks for anyone who can give some information on the purpose of these and why the numbers are different in some post processors.
2007 HAAS TM-1P OneCNC XR5 Mill Pro. Shopbot PRT running Mach3 2010 Screen Set, Super PID and PMDX Electronics.Check out my Gallery on: http://www.helicopterjohn.com/