TNC426

[pocio]

Hy to all!
I need a post file to Alphacam for Heidenhain TNC 426 controller. Can u hlep me?

[FrankCNC]

I'm in the process of modifying my TNC415 Post Processor to suit a TNC430M we recently purchased, this Post should work on a TNC426 as both controllers are covered in the user manual, The Post Processor is set up to suit a TOS WHQ13 CNC Horizontal Machining Centre & most probably wont output the correct code for your machine but can be modified to suit your machine.

Regards,
Frank.