Fagor 800t Postprocessor

[Unimatrix]

Hello,
we have a lathe with a fagor 800t controller and we are locking for a postprocessor. Do u have such a file? And can u tell me where i can download a good CAM freeware tool?

[little bubba]

We have an 8025 controller on one of our lathes, and, honestly its not even worth wasting your time with a post.
2 axis programming with the 8025 (if its anything like an 800t) is so simple and quick, you can have a simple 3 or 4 tool program up and running in about 5-10 minutes.
Also I've never heard of a Fagor post that actually worked, its quite a ways off from a fanuc based code.

[maquiza]

You can find it here
http://www.emastercam.com/posts/edu_x.html