All Post Processors

[claudiu220405]

I am new on here, and I want to start something, like all of us to put all our post processors in here, like:
First you write the program for what works the processors, and then to atach them.
I will start first!

SolidCam:

Hope you enjoy them and waiting for yours.

P.S.:For Moderator: "If nobody will post postprocessor in one weak, and only download them, please delete this post!"
P.P.S.:I do this because of the cheaters!

Thanks!

[claudiu220405]

Nobody?

[Novec]

Welcome to CNC Zone, claudiu!

Being a complete CAM noob, I have nothing to contribute at the moment, but I definitely support your initiative! Having it all at one place would make the post processor mess a whole lot easier.

Thanks,
Lars

[MaxMekker]

Don't have much to contribute with, but many thanks for the files :-D
I only have the files that comes with SolidCam and one MACH3 file that is not mine but modified so I can use it.

[jfordbronco84]

Heres the only one I have its Matsuura I80 it works for 5 axis positioning not sure about simultaneous

[juniormachinist]

i need one that does a fadal vmc 4020 with a cnc 88hs

[MaxyTek]

Buongiorno a tutti... avrei bisogno se qualcuno puo' aiutarmi di un post processor dell'heidenhain tnc 426 430 per cimatronE ... che mi faccia impostare la tolleranza della macchina cioè questa (1 CYCL DEF 32.0 TOLERANZA
2 CYCL DEF 32.1 T0.02) e il refrigerante interno ossia M28

[ionutbest2005]

Hello,
hope I can help
fanuc 0m post p and tnc post p for heidenhain
here are my post processors that I use with Vero Visi 19 , working on Fanuc 0M and 18M, and on fadal 88HS, but with head ake on the last one. Does any one have a compatibe post processor that will work on fadal , with Visi19? Thanks

[claudiu220405]

Don't have much to contribute with, but many thanks for the files :-D
I only have the files that comes with SolidCam and one MACH3 file that is not mine but modified so I can use it.

Hy man,
Can you send me Mach3 post please?

[MaxMekker]

Mach3 SolidCam files that I use.
4th axis that I mentioned earlier I don't have the owners permission to upload as he paid a lot for it.

[claudiu220405]

Mach3 SolidCam files that I use.
4th axis that I mentioned earlier I don't have the owners permission to upload as he paid a lot for it.

Thanks for your pp. I also paid a lot for my posts, but F*** with payng the posts.
Let everybody use them.
I also have post for DMG DMC 635V with sinumerik 840d. If somebody want them I can upload.

[pabrier]

My humble offering, an Alphacam post for a Heidenhain 407 on a 3 axis mill. Good thread Claudiu!