| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Post Processor Files Discuss post processor files here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-21-2010, 06:06 AM
| |||
| |||
Does anyone have a good post for a Milltronics Centurion V control? I have Gibbs 2007. I do have some posts for Milltronics but none seem to work. I can 't get the machine to read from a disc. Any help would be appreciated.  |
|
#2
06-21-2010, 08:02 AM
| |||
| |||
| According to their documentation just about any Fanuc Mill Post should work. Is your floppy crapped, or are your files in an incorrect format, name and extension-wise. Name has to be O or P, followed by 4 digits. Remove the file extension, if you are posting it with a correct name, and Gibbs has tacked an extension on (eg: rename "O1234.txt" to "O1234" and click yes at the warning. Cheers Trev |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem- Posting Gibbs Cam to Milltronics | Chizel | Milltronics | 2 | 06-21-2010 04:03 PM |
| POST FOR MILLTRONICS | Chizel | Milltronics | 1 | 05-04-2010 10:54 AM |
| Gibbs Post needed for Milltronics w/ Centurion Vii | ABCOTIM | Post Processor Files | 0 | 10-08-2008 10:13 AM |
| mc post for a milltronics w/centureon 7 | machinist77 | Milltronics | 5 | 04-30-2008 08:44 AM |
| I need a post for Cimatron to milltronics CNC | tarifeno | Post Processor Files | 0 | 09-27-2007 08:11 AM |
| | |
Linear Mode
