need help- post processor for mastercam needed for my axyz series 6010

Results 1 to 2 of 2

Thread: need help- post processor for mastercam needed for my axyz series 6010

  1. #1
    Registered
    Join Date
    May 2017
    Location
    Canada
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default need help- post processor for mastercam needed for my axyz series 6010

    Hi i have an axyz series 6010 router that i would like to be able to use mastercam on. Currently using tool path. Does anyone know what type of post processor i would need to be able to do this?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: need help- post processor for mastercam needed for my axyz series 6010

    Unfortunately, if you are using ToolPath, you are using an AMC controller in the table. That being said, ToolPath is the proprietary software that runs that table. An electronic retrofit would bring you to the A2MC which can be controlled by many different types of CAD/CAM softwares. This kit can be ordered (and installed) from AXYZ or you can try to undertake this adventure yourself and replace whats needed to be able to run say Mach 3 or something similar.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need help- post processor for mastercam needed for my axyz series 6010
need help- post processor for mastercam needed for my axyz series 6010