Need Help! Mastercam Post for Doosan Lynx 220LY


Results 1 to 3 of 3

Thread: Mastercam Post for Doosan Lynx 220LY

  1. #1
    Registered
    Join Date
    Aug 2016
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Unhappy Mastercam Post for Doosan Lynx 220LY

    Morning all,

    i have a Doosan Lynx 220LY which is brand new. and am using Mastercam X9. the problem i'm having is that the UK division of mastercam (4d engineering) appear to be a bunch of incompetent morons and sales people who have never touched a machine in their life. anyway a side from that i'd like to know if anyone could help me. originally i purchased a post from 4D Eng for £695 and then they told me it wasn't quite for that machine but for a similar daewoo machine and would help me to change it so it would run our doosan. i'm not convinced that the post was anything other than the generic C-Y post renamed. They are now saying they will come up and 'take a look' for another £1000, obviously i don't want to be paying this and would like my original sum of money i paid for this post back. Rant over.


    I was wondering if anyone has a post that i could possibly use to get me up and running. a Puma post might do it but i'd have to fiddle with it i guess..

    Regards

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2013
    Location
    Afghanistan
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam Post for Doosan Lynx 220LY

    Refer to the Postability | Mastercam Post Processors This is the best developer for postprocessors



  3. #3
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam Post for Doosan Lynx 220LY

    I just found out about this posting. Did you get a good post yet for your Machine. I know we can help you if need be.

    PS to the posting from Zub345 you will not be able to go directly to that company as you have to go thru a re-seller of of Postability to purchase.
    We are a authorized re-seller of this post and also for Cimco posts.

    I hope you got this worked out.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mastercam Post for Doosan Lynx 220LY

Mastercam Post for Doosan Lynx 220LY