Newbie Mitsubisih MV2400s - Mastercam X2 Post


Results 1 to 1 of 1

Thread: Mitsubisih MV2400s - Mastercam X2 Post

  1. #1
    Registered
    Join Date
    Nov 2014
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Mitsubisih MV2400s - Mastercam X2 Post

    I am in process of learning post building but am wondering if someone has a post processor that would hopefully be closer to my requirements. A later post would even be useful for learning.

    My first attempt included some hard-coding and does not work well with multi-passes. I have a legitimate hasp but am not on any maintenance plan.

    My issue is that my post is only giving me wire thread after a move and not fluid on, wire on etc. for my second profile. I can't hard-code as they are not required for skim passes.

    Similar Threads:
    Last edited by Deming; 07-22-2016 at 06:15 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitsubisih MV2400s - Mastercam X2 Post

Mitsubisih MV2400s - Mastercam X2 Post