Need Help... Mastercam X5 Post
Registered
Need Help... Mastercam X5 Post
Hello all,
When I post an NC file, 2 lines of code are written that I don't need and am wondering if there is away to permanently alter the post so that I don't have to edit it each time.
Here is an example:
%
O0000
(PROGRAM NAME - TEST)
(DATE=DD-MM-YY - 27-10-15 TIME=HH:MM - 15:17)
N10G20
N20G0G17G40G49G80G90
( 1/32 FLAT ENDMILL TOOL - 1 DIA. OFF. - 0 LEN. - 0 DIA. - .03125)
N30T1M6
N40G0G90G54X-.4473Y-1.4435A0.S10000 M3
N50G43H0Z.405
N60Z.185
N70G1Z0.F4.
N80Y-.506
N90G3X-.5723Y-.381R.125
N100G1X-3.6973
N110G3X-3.8223Y-.506R.125
N120G1Y-2.381
N130G3X-3.6973Y-2.506R.125
N140G1X-.5723
N150G3X-.4473Y-2.381R.125
N160G1Y-1.4435
N170G0Z.405
N180M5
N190G91G28Z0.
N200G28X0.Y0.A0 .
N210M30
%
I would like to modify the post program to permanently delete the 2 parts that I have in italics and bold type.
Thanks in advance for any help...
Randy Similar Threads:
Registered
Re: Need Help... Mastercam X5 Post
You had any help with this?
Sent from my HTC One M9 using Tapatalk
Need Help... Mastercam X5 Post
Tags for this Thread
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules