Feeler FTC30 with Seimens 810D controller.

[waseem sajjad]

I have feeler lathe FTC30 with Seimens 810D controller, Problem is that when we take offset on any diameter
and start program to cut, tool was came and plus extra 10mm in X Axis,but our position counter is currect but phisically tool is not correct position.
Can any one help me. I can highly appriciate on this.

Similar Threads:

• Sinumerik 810D Controller from SolidCam
• requesting key strokes to clear battery alarm for Seimens 810 T controller
• Seimens 840 D heilical milling
• Seimens Probing and Rotation
• Need Help!- MC 9.1 Post Processor to Sinumerik 810D Controller