Post processor info for Mastercam to Mach 3

[9lrac9]

Yes I have Mastercam and 'm looking for a post pro/ to Mach3 controller...
in short I have had all kinds of issues with getting everything to work together. Any help in the right direction would be a great help. Any one on one come to my shop and help me get all that I have,running there is compansation to help me. Thanks... I live in Ontario ca.

Similar Threads:

• Need Help!- Mach 3 and Mastercam X# post processor issues
• Need Help!- Mach 3 and Mastercam X# post processor issues
• New Machine Build- Mach 3 and Mastercam X# post processor issues
• Need Help!- Mach Post Processor For Mastercam X3
• MasterCam X2 For Mach 3 Post Processor

[timoty]

Hi

Write to me timoty@hot.ee maybe I can help.

[motomitch1]

you can find it here (( MACH3B_for_MC9.zip ))
http://cnc.novalab.org/mach_files.htm

[9lrac9]

motomitch1... Does it really work... My machine likes to things that I did not put in the program and I always have to edit them out. And even then I have to dry run 200000 lines and wait for one I did't catch. Thank you

[motomitch1]

I dont know, I use onecnc.you might have to change some settings in mach 3

[dishawcues]

Is there a way to eliminate the parenthesis () when entering a manual entry in MasterCam? When I insert a manual entry in the tool paths, your pp wants to place () around the comment or insertion Ex:

(G91 A60.0 F50.0)
(G90)

[alma999]

In the window, where you type a text, there are two radio button (left lower corner). Choose the "As code"!

[dishawcues]

Da, what was i looking at, thanks right in front of my nose.

[YoannMainville]

Hello 9lrac9, could you told me if you fins something to help you, because i need help to and if you could help me about mastercm x4 post processor for mach 3. yoannmainville@live.ca