would it be the same for fusion 360 ?
[QUOTE=sengenn;2230256]HSM express.[/QUOTE]
For this type of machine you can use default Fanuc - with some manually modify, if remember correct this machine have some some special Mfunction.
Or if you want modify post for this, you can write me and i will make quotation for this :) .
[email]msskotak@gmail.com[/email]
Postprocessors, VBA macros, .NET programming.
www.ccsoftcz.com
would it be the same for fusion 360 ?
Hello everyone,
I'd kindly want to ask you if someone could provide a SolidCAM 2016 or 2017 or 2018 or 2019 postprocessor for Heidenhain iTNC530 or TNC 640. I am a student at the university and i have to run the 3 axis heidenhain machining centre at school.
our school bought solidcam license but they wont invest in original post for the existing machine. I tried to use some older post from 2013 SolidCAM but it makes a lot of troubles like putting maximum spindle rpm into generated G-Code randomly. I found that this is common problem but never found a solution in any thread.
I hope some of you do have original post for new SolidCam and could send it to me. I'd be beyond thankful, because its becoming a big headache to solve this problem.
Thank you very much in advance.
[email]misak007@azet.sk[/email]
[QUOTE=sengenn;2230268]would it be the same for fusion 360 ?[/QUOTE]
Yes all. Autodedk cam application.
Postprocessors, VBA macros, .NET programming.
www.ccsoftcz.com
i am looking for a postprocessor solidcam for DMG CMX70U
Good day, i am looking for a postprocessor for Powermill OKK VM5 II (Fanuc 16iM) [email]jcrr9415@outlook.com[/email].
Regards!
Hi!
I'm looking for a postprocessor for Sinumerik 840D controller. Can anybody give me this?
Thank you!
[QUOTE=claudiu220405;1110784]Thanks for your pp. I also paid a lot for my posts, but F*** with payng the posts.
Let everybody use them.
I also have post for DMG DMC 635V with sinumerik 840d. If somebody want them I can upload.[/QUOTE]
Dear Sir,
Greetings of the day.
Need Siemens 840D post processor files.
Can anyone help?
Regards.
Hello, I need post MAstercam2018 for TNC410 can someone help me
Saludos Amigos estoy buscando un posprosesador de Mach3 para Mastercam X7 le agradezco mucho a la persona que gentilmente me lo suministre
[COLOR=#626262] I need post processor Mastercam 2018 for daewoo mill 3 axis with control fanuc 21.
can some body sell it?[/COLOR]
I very much need a post processor for siemens 840D (sinumerik operate 4.5) 5 axis for MC 2018/19
any help would be greatly appreciated.
Hello everyone. i need post processor for HURCO VMX42i 5 axis for mastercam X9/2018/2019. Can everyone share me? Thanks.
[COLOR=#000000]hi everyone ,
Someone will have the post for selca, mastercam x5 or up version ? Thanks![/COLOR]
[EMAIL="aka.vandalo@gmail.com"]aka.vandalo@gmail.com[/EMAIL]
[COLOR=#000000]Hello, I need post MAstercam for Sinumerik 810d can someone help me.[/COLOR]
[COLOR=#000000]Hello, I need post MAstercam2018 for TNC410 can someone help me.[/COLOR]
Hello everyone. I need post processor for Mikron WF 61 C/TNC 355 for Solidcam 2017. Can everyone share me? Thanks.
[email]avangardgps@gmail.com[/email]
Salve , volevo sapere perche in alphacam r2013 quando eseguo lavorazioni su superfici 3 d il post processor della xilog non inclina la testa della fresa ... non crea gli angoli Q e R ...ma in alphacam ho visto che nei percorsi non ci sono neanche gradi di inclinazione ....
E' il post sbagliato o ce' qualcosa che devo correggere in alphacam???? la simulazione pero viene eseguita giusta... cosa posso fare??? grazie
Good day, i am looking for a postprocessor heidenhain itnc 530 5-axis USING MasterCam 2018
thanks
[email]nid69n@hotmail.com[/email]
Hi,
I am looking for the PartMaker Post Processor for Citizen L20E with the correspondent archives for full simulation (.mch and .fms). Do you know where I can find it?
Thanks and regards