| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Polls All Polls should be posted here only not in the forums. Please post relevant polls only. |
| | |
| This forum is sponsored by: |
| View Poll Results: Are radios allowed in your shop? | |||
| Yes - individual radios are allowed |     | 298 | 63.27% |
| No - no radios allowed |    | 58 | 12.31% |
| Yes - 1 radio plays over a loud speaker/intercom |    | 91 | 19.32% |
| No - but what they don't know, won't hurt them |    | 24 | 5.10% |
| Voters: 471. You may not vote on this poll | |||
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#74
05-05-2009, 10:44 PM
| ||||
| ||||
| LOL, Heavy Metal is Inspirational for Aggressive Machining. I makes you want to increase the Feeds and Speeds 200% or More if the variables permit.  BTTW Machining.
__________________ Toby D. "Imagination and Memory are but one thing, but for divers considerations have divers names" Schwarzwald (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) www.refractotech.com  |
|
#75
10-09-2009, 12:21 PM
| ||||
| ||||
| If you're running screw machines you need to listen to the new wave of music...screamo. 4 machines running 3/8 hex bar stock at 2000rpm, and it don't matter. To my dad, 4 machines running 3/8 hex bar stock at 2000rpm WAS music. |
| Sponsored Links |
| |
|
#76
04-05-2012, 12:03 AM
| ||||
| ||||
| We're allowed to have personal radios in our shop, but to be honest, its annoying as all get out. The problem we have is people hooking their phones or mp3 players up, then cranking their music, and spending half of their production time screwing with the playlists. If i had a vote, it would be for one standardized station or a single wireless stream point, but then again, i'm just a simple machinist  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Basic Shop Safety | Tony@UEC | Safety Zone | 8 | 12-27-2009 04:56 AM |
| Shop air advice needed | Swede | General Metal Working Machines | 26 | 12-10-2009 02:58 PM |
| Where is your shop? | wjbzone | CNCzone Club House | 6 | 06-29-2007 12:02 PM |
| Shop Control Software | sundara | General Metal Working Machines | 5 | 03-12-2007 02:27 PM |
| Allocating room for a new hobby machine shop | CactusChip | CNCzone Club House | 8 | 03-29-2004 12:58 AM |
| | |
Linear Mode
