| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Polls All Polls should be posted here only not in the forums. Please post relevant polls only. |
| | |
| This forum is sponsored by: |
| View Poll Results: Do you use a device like this in your shop? | |||
| Yes, we use it all the time! |     | 2 | 5.56% |
| No, never knew it exsisted! |    | 20 | 55.56% |
| No, I would not trust it! |    | 2 | 5.56% |
| What for? |    | 12 | 33.33% |
| Voters: 36. You may not vote on this poll | |||
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
04-27-2007, 06:48 AM
| ||||
| ||||
Do you use a device like this in your shop? Yes, we use it all the time! No, never knew it exsisted! No, I wold not trust it! What for? The CncGcoder is Hanheld unit with pre-installed CncGcoder software, that uses an RS-232 serial cable.  |
|
#3
04-28-2007, 09:41 PM
| ||||
| ||||
| Knew about them but was told that a Lap Top with CAD/CAM was a lot better when first starting out in CNC Programming.  Fanuc has had these for quite some time now. Thankful that I went the Lap Top Route LOL. Cheers!!!!!!!!!! 
__________________ Toby D. "Imagination and Memory are but one thing, but for divers considerations have divers names" Schwarzwald (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) www.refractotech.com |
|
#4
05-03-2007, 01:52 PM
| |||
| |||
| I have seen these units that Fanuc technicians use. What I don't like is not having a full keyboard to name downloaded to our filing system format we use ( ie: AB-12 ) etc. Other than that they would be okay as they are rugged enough for the shop enviroment and would outlast a laptop.
__________________ If it ain't broke? Your not trying |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Code Transfer - Bosch CC100 | martindugdale | Commercial CNC Wood Routers | 8 | 09-20-2011 05:23 AM |
| Trouble with DXF to G Code Transfer | mlapacz | SheetCam | 8 | 03-04-2007 12:25 AM |
| File Transfer | roninB4 | CNCzone Club House | 3 | 08-27-2006 11:05 AM |
| how to transfer? | hop | General CNC (Mill and Lathe) Control Software (NC) | 0 | 06-14-2006 11:35 PM |
| dnc transfer trouble | Joe Black | Machine Problems, Solutions , Wireless DNC, serial port | 23 | 11-30-2005 07:02 PM |
| | |
Linear Mode
