LinkBack URL
About LinkBacks
what does it do that a few feet of cable and your PC won't do? Almost $700 seems awfully expensive.
| | |
Yes, we use it all the time!
No, never knew it exsisted!
No, I would not trust it!
What for?
Do you use a device like this in your shop?
Yes, we use it all the time!
No, never knew it exsisted!
No, I wold not trust it!
What for?
The CncGcoder is Hanheld unit with pre-installed CncGcoder software, that uses an RS-232 serial cable.
what does it do that a few feet of cable and your PC won't do? Almost $700 seems awfully expensive.
Knew about them but was told that a Lap Top with CAD/CAM was a lot better when first starting out in CNC Programming.
Fanuc has had these for quite some time now.
Thankful that I went the Lap Top Route LOL.
Cheers!!!!!!!!!!
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
I have seen these units that Fanuc technicians use. What I don't like is not having a full keyboard to name downloaded to our filing system format we use ( ie: AB-12 ) etc. Other than that they would be okay as they are rugged enough for the shop enviroment and would outlast a laptop.
If it ain't broke? Your not trying
Posting Permissions
| | |
