who wants indexable tooling for their pc 892?

[spoiledbrat]

I want to start a poll to determine the need for indexable tooling for the porter cable 892. I have been using these successfully for 3 years now, probably 1000 hours or more. These are not an original idea, just something a few of us have. They do not use setscrews, but Loctite brand cylindrical locking compound to hold the tool, a propane or map gas torch releases the bit.

These tool holders allow you to use the Tool offsets table in Mach3, and are a great time saver. I will only make these if interest is shown. I will only make three sizes: 0.500", 0.250", and 0.125".

They will be offered for $35 each, plus S&H, and DO NOT include the collet nut or snap ring. Collets and snap rings (part #'s 876669 and 823030) cost $11.01 a set from the manufacturers parts site.

[spoiledbrat]

I am definitely glad I did this poll before getting them made... I thought more people would want these, as I find them indispensable for my production operations.

[audin]

I think you've priced yourself out of the market there...

[forextrader07]

i would order 3