The Zone and CAD/CAM Trainer

[henryblowery]

Thanks CNCadmin, you answered my question. It's not my posts that were getting pulled, people at the other site were talking about it. I just started the poll to see what ya'll thought about it.

I didn't and don't mean to start trouble by this thread, so please don't take it that way.

Gray

[tobyaxis]

Originally Posted by henryblowery Thanks CNCadmin, you answered my question. It's not my posts that were getting pulled, people at the other site were talking about it. I just started the poll to see what ya'll thought about it. I didn't and don't mean to start trouble by this thread, so please don't take it that way. Gray

Gray,

The reason that a specific member was Banned is between Paul G (CNC Zone Site Owner) and that Member. It really isn't our place to ask why that person was Banned.

BTW: CNC Zone has only Banned one other Member that I can recall. That means that Paul and the Moderators are doing a very good job to keep this Site Clean and Full of Helpful Members.

As long as everyone follows the rules this Site Will be able to Help many such as us.

Thanks for the nice Site Paul

[sdantonio]

a little knowledge is a dangerous thing, especially in this business.

A lot of knowledge, from a variety of sources, is a good thing

[Cruiser]

Join, well, how about some visibility ! I Really need to get cad cam informed, and i havn't heard of cad/cam trainer ?

[diarmaid]

Well that seems to have solved the problem. CAD/CAM Trainer seems to have disappeared off the wwweb. Or at least, I cant locate any of its pages, and I had it bookmarked! Wonder what happened....is there a web-based bermuda triangle...

Edit: Seems to be working again now!....hmmm...

[tobyaxis]

Originally Posted by diarmaid Well that seems to have solved the problem. CAD/CAM Trainer seems to have disappeared off the wwweb. Or at least, I cant locate any of its pages, and I had it bookmarked! Wonder what happened....is there a web-based bermuda triangle... Edit: Seems to be working again now!....hmmm...

Maybe, but I am on it right now and have been since 11:30am.

[idaho psycho]

More information is almost always a good thing. If you don't agree with it then pass by it. But it may be an opportunity to learn a new thing and broaden your horizons.

[diarmaid]

Originally Posted by Cruiser Join, well, how about some visibility ! I Really need to get cad cam informed, and i havn't heard of cad/cam trainer ?

Can't post the direct link because its against the zone rules. Which is fair enough and ok, I have no problem with that.

But here's a hint! :

Go to 'Google.com'
Search for "CAD-CAM Trainer Forum" (Case Sensitive)
Click on the 3rd search result which is a vbulletin site.
Look at post number 2333.

(If this post is against the zone rules then I apologise and feel free to remove it.)

[henryblowery]

Originally Posted by diarmaid Go to 'Google.com' Search for "CAD-CAM Trainer Forum" (Case Sensitive) Click on the 3rd search result which is a vbulletin site. Look at post number 2333.

What do you mean by "post 2333"? How would you find it?

Gray

[diarmaid]

The same way you'd find post number 3, or 5, or 25, in this thread. But happily from google the link opens the thread on the correct page so just scroll down to the right post (2333).....Its a long thread!

[cadcam]

Edited by me