What machines are in your home hobby shop?

[widgitmaster]

What machines are in your home hobby shop?



Bridgeport Clone, Metal Bandsaw, 14x40 Engine Lathe, 7" Pedistal Grinder, 6:x12" Manual Surface Grinder, Floor Stand Drill Press, 1-Ton Arbor Press, Oxy-Acetylene with B-Tanks, Finished homemade CNC Router, all in a 9'x25' space!

[ViperTX]

Mill Drill, Lathemaster 8x14, Chop Saw, Mitre Saw, Table Saw, Wood Bandsaw, Metal Bandsaw, Hobart Handler MIG, Air Compressor, Wood Planer, Vacumn Caster, Centrifical Caster, Wood Router, CNC Router in Progress and all the accessories that go with all this activity (Acetylene Torch, Plumber's Torch).

Oops forgot, oscilloscope, logic analyzer, VOMs, etc.

[widgitmaster]

It's too bad these dang polls only give 6 (SIX) choices!

It would make them more accurate if they had more!

Eric

[ger21]

Table Saw, wood bandsaw, drill press, wood jointer and planer, wood lathe, 12" disc sander with 6x48 belt, spindle sander, unfinished cnc router.

[CNCRob]

Small wood band saw, small drill press, small metal cutting saw, and cnc router.

[Mcgyver]

yeah, its a disease. 13/36 lathe, xlo mill, drill press, surface grinder, t&c grinder, shear, arbor press, horizontal bandsaw, compressor, bench grinders, belt sander, O/A & stick welder, and not much space left in a two car garage. still need to collect electronics stuff and woodworking, lack of space is saving me from acquiring more!

[bkukowski]

well, if i had answered this 2 days ago I wouldn't have been able to check anything! Thankfully I just bought a $120 craftsman drill press

[CJL5585]

CNC, drill press, metal lathe, routers, air compressor, RF 1.2 Gig Signal Generator, waveform generator, dummy load, transistor checker, oscilliscope, table saw, router table, SWR meter, 2 scroll saws, sweep generator, and some other stuff.

Jerry

[Adobe Machine]

Retro CNC Tree Mill,Bridgeport manual Mill,Pratt-Whitney 12X36 type C lathe, 17X60 LeBlond Regal Lathe,PowerMatic 24" Verticle Band Saw,9X16 Delta band saw,Miller 172 Mig, Miller 2060 Plasma,3/4 hp polisher, table saw,radial arm saw,Snap On "Taco Stand" bottom box ,side box and top box,engine stands,engine hoists,home built engine test stand w/hydraulic load pump and heat exchanger.Most tools are old, well cared for ,and functional.All were made in the USA (that tells you their age) .Our childern will have one heck of a garage sale someday.

[ViperTX]

Allright Adobe Machine...nice selection of tools.....well the problem is the kids will most likely not know the value of any of our machines and will sell them for pennies on the dollar once we are history......

Are you in New Mexico?

[MrWild]

Bridgeport series I, Southbend 16 x 42 with taper attachement etc, MIG, TIG, Oxy/acet rigs, drill press, full Gerstner 26" box and base of T&D tools, full roll around mech tool boxes, 4.5' x 6' weldng table, 6" Wilson vise, floor drill press, pedastel tool grinder (with diamond wheel), bench grinder.

Building a CNC Mill/drill table, future wants are a small surface grinder, Kurt 6" vise, and press.

[trubleshtr]

Ok,....Now everyone respond with your exact locations, and where the spare keys are kept


Let's see, unfinished cnc,2 robots, slew of electronic and automation parts,PLC's, Mill,drill,grinder,table saw,Chop saw,metal bender,Mig welder,bench sander.
My next purchase will be a lathe or metal band saw