Market Research: Bolt On X2 Mini Mill Column Support

[Nateg281]

I'm trying to determine if there is enough interest in a bolt on X2 mini mill column support to push forward with the idea. The support would be solid steel plate, take less than 30 minutes to install, and come with detailed directions and all necessary hardware. Please use the poll and let me know what you all think.

[mrcodewiz]

I think for many it would hinge on cost. Maybe you could either give a ballpark or ask which price range would people be interested in buying one (e.g. $50 to $100, $100 to $150, etc)

[Nateg281]

I think for many it would hinge on cost. Maybe you could either give a ballpark or ask which price range would people be interested in buying one (e.g. $50 to $100, $100 to $150, etc)

Cost of material, production time, and development would dictate the price be between $50-$75 including shipping. The center punch, drill bit, and tap necessary for installation would be sold as well in a reasonably priced kit that would ship in the same package/box as the column support. I know that some on this forum would already have the necessary tools for installation and thus not need the install kit. I welcome any thoughts on the above....

[Nateg281]

I'd really like to hear anyones thoughts and ideas about this. Not enough demand? Good idea? I'm open to any and all thoughts.....

[mrcodewiz]

You may have better luck eliciting feedback in the Benchtop forum but the idea seems sound as long as it is designed well. Perhaps you could provide some before and after measurements that show the reduction in deflection with your design.

[Nateg281]

I'll try to do that sometime soon. It's still in the prototype stage right now. I'll have one made and on my mill in the following weeks. Very busy right now with work. It tends to take away from my play time in the garage