| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| PlasmaCam Discuss PlasmaCam machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-02-2010, 04:23 PM
| |||
| |||
I have an older PlasmaCam machine that sometimes refuses to cut areas along the cut path. I've tried retracing the path and it stops and starts cutting at the same point everytime. The torch continues to work along these points but it just does not cut. I'm running a Hypertherm torch. Anyone here have a clue why this happens? Frustrated, John  |
|
#3
02-20-2010, 12:03 AM
| |||
| |||
| This has happened to me several times recently. In my case, it was worn consumables or blowback material stuck to the torch tip. I can usually just pass a piece of cardboard over the tip to make sure it's free of debris, back 'her up and hit the start button. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Machine stops at end of tool path | Cellar Dweller | Mastercam | 5 | 09-29-2009 05:14 AM |
| M-Stops and starts | shane.vella | Machines running Mach Software | 1 | 09-25-2008 01:48 PM |
| Too many "M00"s. stops and starts | mike hide | SheetCam | 3 | 09-15-2008 06:04 PM |
| I put Carriage stops / E-stops on the x&y Shoptask 1739 Gunmaster....I was bored lol | spunky1974 | Shopmaster/Shoptask | 0 | 06-30-2007 04:13 PM |
| Starts | AZCoyote | CNC Plasma and Waterjet Machines | 12 | 01-20-2005 05:33 PM |
| | |
Linear Mode
