Need Help! Plasma cam: Torch Fires in air. IHS not happening.


Results 1 to 2 of 2

Thread: Plasma cam: Torch Fires in air. IHS not happening.

  1. #1
    Registered
    Join Date
    Dec 2016
    Location
    India
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Plasma cam: Torch Fires in air. IHS not happening.

    Hi,
    After a lot of noise issues and drama, i have finally started my Plasma Cam machine. But now I'm facing this new error when taking the first cutting. After initializing I proceed for cutting with 'Auto Cut control' enabled. But the torch just fires in the air, moves through the cutting path and it never comes down. As I'm a beginner on this machine, I'm not sure why this is happening. I am providing the link of the video and the settings below. I hope someone can help me out.

    https://drive.google.com/drive/folde...Gc?usp=sharing

    regards
    VARUN VASUDEVAN

    Similar Threads:


  2. #2
    Registered cz_apie's Avatar
    Join Date
    Mar 2017
    Location
    South Africa
    Posts
    1
    Downloads
    3
    Uploads
    0

    Default Re: Plasma cam: Torch Fires in air. IHS not happening.

    Varun,

    What plasmacutter are you using? All I can see that is out of spec is your cutting Height of 0.19mm, My Hypertherm65 run on 1.5mm on cutting 3mm steel like in your setup, have you tried enabelling Auto calibrate Z shift on next cut ?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Plasma cam: Torch Fires in air. IHS not happening.

Plasma cam: Torch Fires in air. IHS not happening.