Get Your Pin!


Results 1 to 3 of 3

Thread: Get Your Pin!

  1. #1
    Member
    Join Date
    Nov 2010
    Location
    USA
    Posts
    176
    Downloads
    0
    Uploads
    0

    Default Get Your Pin!

    https://www.google.com/maps/d/edit?mid=zXW7cWI64qtk.kF9Dsmxma9PQ&usp=sharing

    Tell me who you are, where you are (generally, not specifically) and which macxhine(s) you have, and I will place your pin onto the map.

    Green Pin - Go Torch CNC table
    Blue Pin - PlasmaCam 4x4 CNC table
    Red Pin - Samson 510 CNC table



  2. #2
    Registered
    Join Date
    Jul 2014
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Get Your Pin!

    Jay Gallagher, Cedar Hill, TX PlasmaCam 4x4 DHC2



  3. #3
    Member
    Join Date
    Nov 2010
    Location
    USA
    Posts
    176
    Downloads
    0
    Uploads
    0

    Default Re: Get Your Pin!

    Done!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Get Your Pin!

Get Your Pin!