Need Help!- Table Prayer scene

[FunWestTexan]

I wanted to see if anyone had the dxf file for the following picture. I have a customer wanting this on their gate. If you have it, I would be greatful.

Thanks!

[metalworkz]

Originally Posted by FunWestTexan I wanted to see if anyone had the dxf file for the following picture. I have a customer wanting this on their gate. If you have it, I would be greatful. Thanks!

Hello,
Maybe the traced file was not good enough but I wanted to make sure you saw the replies to your post in the 'share your art, files' section here:

http://www.cnczone.com/forums/genera...t_art-621.html

I did a quick trace and scaled it up to 7' but perhaps it was not good enough. There was another reply after mine also. Good luck finding the file!

[4R8]

the words, caught out come to mind. what program are you using for your conversion? It's not a trace style I particularly like but may come in handy.

[Benderart]

The file you're asking for is copyright to Plasmacam.
What you're asking is for someone to violate copyright laws.....good luck with that.

[FunWestTexan]

Thanks for the info benderart, I will contact plasmacam.