| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| PlasmaCam Discuss PlasmaCam machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-02-2010, 09:34 AM
| |||
| |||
Nearly every time the Z axis motor does its thing, aka, moves, I come up with a 194 error code. No other movement trips this code, only the z axis motor. I was wondering if anyone else had this issue. I'm heading out after work to pick up a new parallel cable hopefully with a little better shielding. (no worries, I'm going for the 6 footer ;-) )  |
|
#2
10-09-2010, 09:59 AM
| |||
| |||
| I ended up moving the computer to a more remote location as well as moving the plasma cutter away from the table and computer as much as possible and this seems to have solved the issue. Another thing I did was made sure to plug the table itself into a NON GFI plug. Apparently they were serious about that. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| keyboard & mouse interference issues. | Rich05 | Industrial Hobbies (Support forum) | 2 | 09-19-2010 10:09 AM |
| Reducing RF Interference | stirling | Gecko Drives | 4 | 04-09-2010 10:40 AM |
| Need Help!- ERROR 041 INTERFERENCE IN NRC | jdgromi | G-Code Programing | 4 | 01-02-2009 08:05 AM |
| Hf Interference | Alex S.A | CNC Plasma and Waterjet Machines | 2 | 02-11-2007 06:05 PM |
| Electrical Interference | Scratch | CNC Plasma and Waterjet Machines | 0 | 01-13-2007 10:49 AM |
| | |
Linear Mode
