Well it has been a long time since I completed my plasma table and there have been changes to it down thru the years. Primarily on the gantry using 80/20 alum extrusions. currently I am waiting for all new electronics to put on the table from CandCNC. My old electronics had developed problems and finally puked on me (corrupted Mach 3 mainly). Of course Mach 3 is no longer supported and trying to get it up and going again was a nightmare. So all new electronics coming w/ CommandCNC software and all the latest electronics.
I will try to get some pics of the table as it currently sits. It is not as pretty as it used to be in 2007 but it still works very well and is robust and heavy duty compared to some tables being offered out there.