New Machine Build 2M X 3M CNC Plasma Build


Results 1 to 10 of 10

Thread: 2M X 3M CNC Plasma Build

  1. #1
    Registered
    Join Date
    May 2017
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default 2M X 3M CNC Plasma Build

    Hi guys,

    Tom here, I'm 22, Aussie and new to CNCzone. I'm a 4th year mechatronics engineering student, grew up on a farm and been sticking things together with a mig since I could walk. We've got fairly decent workshop as my father is a boiler maker by trade and we're always making/repairing farm equipment. Anyway I've always wanted a CNC plasma and I had the spare cash so I got to work buying parts.

    Fast forward a few months, plenty of late nights and its up and running, works as well as I'd hoped. Mach 3/Smooth Stepper Control, NEMA34 steppers and 06B chain drive on X & Y axes. Linear guides I've manufactured from 5mm flat and machined square groove rollers. It was never built for super duper accuracy, more so a tough, reliable and cheap. It's got a resolution of 0.7mm and positioning accuracy fairly close to that. MINITHC for height control. Cost me just under $4000 excluding the plasma source. Running a 60A Chinese source, organizing a unimig razorcut 45 as I'm limited to single-phase.

    In the future, I'd like to add a rotational axis and set up for oxy-fuel cutting. Any advice/feedback is appreciated. Happy to answer any questions or post more photos.

    Cheers,
    Tom



    https://www.facebook.com/tommcc21/vi...12991758738912

    Similar Threads:
    Attached Thumbnails Attached Thumbnails 2M X 3M CNC Plasma Build-img_0718-jpg   2M X 3M CNC Plasma Build-img_0756-jpg   2M X 3M CNC Plasma Build-img_1111-jpg   2M X 3M CNC Plasma Build-f4c835bf-ad22-4ea2-9ddc-c803b1f973cb-jpg  

    2M X 3M CNC Plasma Build-img_1098-jpg   2M X 3M CNC Plasma Build-img_1085-jpg   2M X 3M CNC Plasma Build-img_1106-jpg   2M X 3M CNC Plasma Build-img_1078-jpg  



  2. #2
    Member
    Join Date
    May 2012
    Location
    MI,USA
    Posts
    231
    Downloads
    2
    Uploads
    0

    Default Re: 2M X 3M CNC Plasma Build

    any reason for the chain drive? what is the repeatably of the table?



  3. #3
    Registered
    Join Date
    May 2017
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: 2M X 3M CNC Plasma Build

    I was deciding between toothed belt and chain drive, chain was cheaper and I could grab it off the shelf at my local bearing shop. Haven't measured repeatability (I'll get back to you) but it's definitely sub millimeter. The biggest limitation of the chain drive is the resolution. (15tooth * 3/8"pitch) / 200steps/rev = 0.028'' or about 0.7mm. But, good enough for what I'm doing.



  4. #4
    Member
    Join Date
    May 2015
    Location
    Australia
    Posts
    684
    Downloads
    0
    Uploads
    0

    Default Re: 2M X 3M CNC Plasma Build

    Tom, great to see another Aussie plasma build. I was originally going to use chain drive but then I started playing with a manufacturing business that bought a lot of laser cutting so I upgraded to rack and pinion and made my first cuts this month.



    I gotta take some more photos as this one is a bit out of date. My accuracy is about 0.07m and I was hoping to be +- 0.1mm.
    I'm running LinuxCNC and an experimental branch for torch height control using LinuxCNC's PID based features. Its still a bit early to know if it will work. So far so good but it is fun making that first cut!

    Rod Webster
    www.vmn.com.au


  5. #5
    Registered
    Join Date
    Jan 2018
    Location
    Australia
    Posts
    2
    Downloads
    2
    Uploads
    0

    Default Re: 2M X 3M CNC Plasma Build

    Hey Tom, looks good. I'm also new to CNC plasma stuff. I'm 56 and having a go at building a plasma for cutting decorative patterns in unwanted beer kegs. Make good fire pots. I have a Unimig Razor cut 45, but it doesn't have the cnc extra output ports. Did you end up using the same plasma and if so did you have the one with the factory cnc ports?
    Am at the point of hooking my plasma up to the controller. A mate has built a 3 axis controller and we need to hookup to the board to fire, feedback that it has fired and voltage for thc control. Any help would be appreciated.

    Cheers Stew

    Hobart, Tas



  6. #6
    Registered
    Join Date
    Jan 2018
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: 2M X 3M CNC Plasma Build

    Tom that seems to be a very heavy duty table for a plasma.... are you planning on cutting very thick plate or adding a water table? why so heavy table...looks like you could park a car on that baby....
    Rob
    PS you dont use a water table or vacuum system on your table?



  7. #7
    Registered
    Join Date
    May 2017
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: 2M X 3M CNC Plasma Build

    Yep I ended up going with the unimig razor cut 45 with the factory cnc port (Just voltage divider, arc ok and torch on) could just wire straight in using the miniTHC or similar if you don't mind opening the case or I'm sure unimig in melbourne could install the cnc ports in your machine. Very happy with the unimig machine, cuts much straighter in thicker plate than the larger chinese plasma.



  8. #8
    Registered
    Join Date
    May 2017
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: 2M X 3M CNC Plasma Build

    Yep, probably over engineered, but when I fork a sheet of 16mm plate on (near 400kg) I'm glad it's solid, always square and level.



  9. #9

    Default Re: 2M X 3M CNC Plasma Build

    I've cnc plasma cutting machine but I'm new to it. I've dsp 501 to control it. I don't know how to configure dsp parameters. Including ctting speed for motors and how much ampere torch i should use?. Can anabody help me to configure my dsp for cnc plasma cutting machine. And which software to use for drawing and then convert it into a format required for cnc plasma cutter.?
    Waiting for reply.
    Tapatalk Cloud - Downlaoad File 20180304_144554.jpg




    Last edited by Muhammad_Haroon; 03-26-2018 at 01:29 PM.


  10. #10
    Registered
    Join Date
    May 2017
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: 2M X 3M CNC Plasma Build

    Just an update, got the oxy set up on the table for a job cutting 2'' plate 2M X 3M CNC Plasma Build-img_1172-jpg2M X 3M CNC Plasma Build-img_1179-jpg

    Attached Thumbnails Attached Thumbnails 2M X 3M CNC Plasma Build-img_1172-jpg   2M X 3M CNC Plasma Build-img_1179-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

2M X 3M CNC Plasma Build

2M X 3M CNC Plasma Build