New Machine Build Desktop mechanical pencil lead EDM cutter


Results 1 to 1 of 1

Thread: Desktop mechanical pencil lead EDM cutter

  1. #1
    Registered
    Join Date
    May 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Desktop mechanical pencil lead EDM cutter

    I'm building my first EDM, a small desktop cutter, about 90x90mm cut area. total size 260x200x200. use 0.5 mechanical pencil lead as electrode.
    l have buy 3 second-hand THK KR linear actuators for XYZ axis, screw lead is 1mm. I have buy second-hand step motor for every actuator, has 0.72/step. so I can move 0.001mm at both direction every half step.



    Similar Threads:
    Last edited by PattyBJ; 07-25-2014 at 01:27 AM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Desktop mechanical pencil lead EDM cutter

Desktop mechanical pencil lead EDM cutter