MK3/4 power supply limit ?

Results 1 to 3 of 3

Thread: MK3/4 power supply limit ?

  1. #1
    Member
    Join Date
    May 2011
    Location
    Europe - italy
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default MK3/4 power supply limit ?

    I have a MK3/4 card, the question is: in the manual card pag. 6 I read: "Use separate power supply for controller and stepper drivers.
    Controller: 8-24VDC, 200mA. "

    what limit max of power supply I can load ? from 8 to 24V, A?

    Similar Threads:


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: MK3/4 power supply limit ?

    I think manual is clear about this. For controller you need 8-24VDC, 200mA.



  3. #3
    Registered
    Join Date
    May 2015
    Location
    ZA
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: MK3/4 power supply limit ?

    Closer to 8V is better for the voltage regulator. 9V is a common value. 200mA as per the manual its sufficient

    Sent from my LG-D722 using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MK3/4 power supply limit ?

MK3/4 power supply limit ?