Jogging keyboard with potentiometer question

Results 1 to 2 of 2

Thread: Jogging keyboard with potentiometer question

  1. #1
    Registered
    Join Date
    Aug 2017
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Jogging keyboard with potentiometer question

    I have the planet CNC Jogging keyboard with potentiometer but would like to build my own enclosure for it with a longer reach than the ribbon cable that comes with it so I was thinking of buying the Adapter for 16 pin header (https://planet-cnc.com/product/adapt...16-pin-header/ and building my own wire bundle. I guess I would have to get one on each side for it to work. I am very much new to all of this but A do you think that would work or B do you have a better idea? Thanks

    Similar Threads:


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Jogging keyboard with potentiometer question

    If you will use existing jogging keyboard then you can get longer ribbon cable. In our "Connection kit" is 100cm of 16 wire ribbon cable.
    https://planet-cnc.com/product/connection-kit/
    If this is not enough then ask for longer and we will cut it to any size you want.

    If you will use some other buttons then "Adapter for 16 pin header" is better solution.

    Last edited by PlanetCNC; 08-23-2017 at 04:18 PM. Reason: fixed typos


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Jogging keyboard with potentiometer question

Jogging keyboard with potentiometer question