Does your control box has parallel port? There are step and dir pins that you need.
Hello,
I have purchased a new controller board from PLANET-CNC and now I am trying to wire the motors and all into the new controller board, the one thing I do not know is the pinout the board that came with the cnc is JP-382C with a piece of tape with the number 054236 How do I do it?
Similar Threads:
- Need Help!- Chinese 3020T CNC stepper motors not moving. Please help!
- Chinese 3020T CNC - Reducing Control Box Fan Noise
- Solved Installing X-Axis Limit End Switches On A Chinese 3020T
- Making a Chinese 3020T-D Enclosure from a large Plastic box
- Need Help!- Home switch for CNC 3020T- with a Spindle Control Board, JP-382A and JP-1482 Board
Does your control box has parallel port? There are step and dir pins that you need.