PicStep Moves While Router Running Problem SORTED


Results 1 to 3 of 3

Thread: PicStep Moves While Router Running Problem SORTED

  1. #1
    Registered
    Join Date
    Aug 2007
    Location
    za
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default PicStep Moves While Router Running Problem SORTED

    Sorry its been so long since i last posted ;-) To busy cutting things out. I had a job for a school. Knowing that sometimes i would loose my Zero Setting due to interference. It was only caused while using a router or something that sparks a lot on the comutator. Most other jobs i have been using i high speed drill which did not give me problems. After i screwed up the job i had to fix it and sort out the missing steps. Been in the tv repair business i started tracing the fault. 1st i twisted the bi-polar wires to the motor. No Better 2 cut out a complete filter circuit from a Sony TV & placed inline with my supply. No Better, 3 Earthed the Machine,PC & Control Board, No Better, Last ;-) 2 x 10 nf caps 1 on the input & 1 on the step control of the Picstep Boards DOWN TO GROUND. I hope this helps anyone having similar problems. Now I can frigging use my welding machine on the same supply and my motors DO NOT MOVE EVEN 1 STEP. Good luck all.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2006
    Location
    Hong Kong
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Thanks for the tips!



  3. #3
    Member robe_uk's Avatar
    Join Date
    Apr 2005
    Location
    Northern Ireland
    Posts
    253
    Downloads
    0
    Uploads
    0

    Default

    Worked for me

    I'll get it finished sometime after I start it.....


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PicStep Moves While Router Running Problem SORTED

PicStep Moves While Router Running Problem SORTED