Got my Fanuc red cap servo motor running!

[jmelson]

Originally Posted by dresda Now I'm really confused my head is spinning. The DSPMC from vital systems works good on my Servo dynamics drives, he does sell a less expensive card to use with EMC2.

Sorry to make your head spin! But, Pico Systems also has a complete system for the original
Fanuc red cap motors. There is the Universal PWM Controller, the Fanuc encoder converter and the brushless PWM servo amp. I can guarantee all this works, and have configs files already
set up for it.

Jon

[Al_The_Man]

I picked up a batch of motors marked in a similar fashion, 2000 pulse coder but I did not confirm the encoder # first, it turned out they were quadrature differential OK, but were one of the odd ball low level sine wave signal encoder that Fanuc uses an intermediary unit between motor and drive.
Al.

[jorber]

Originally Posted by jmelson Pico Systems also has a complete system for the original Fanuc red cap motors.

Jon is your web down? I am trying to get the price for the fanuc encoder converters.

[jmelson]

Originally Posted by jorber Jon is your web down? I am trying to get the price for the fanuc encoder converters.

We've been having some cable modem problems, and just had a new modem
installed. Hopefully, it is all working fine now.

Jon