| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| PIC Programing / Design Discuss programing of PIC chips here and design of electronics using PIC chips. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-30-2008, 04:52 PM
| |||
| |||
hello to you all.i have a basic stamp board and i want to make a cnc and controlled it with this board.i have also 3 servo by futaba.how i can controle a homemade cnc with my pc ,the basic stamp and this 3 servos?what software i can use?please help me...    |
|
#2
02-02-2008, 10:15 AM
| |||
| |||
| answer please.. |
|
#3
02-02-2008, 09:12 PM
| |||
| |||
| the servos you have would not be a good application for this project. But if you could get some stepper motors from some old printer you could use them. There are a lot of examples out there that show you how to use a stamp to control a stepper motor and the servos. Google it. |
|
#4
02-03-2008, 10:28 PM
| ||||
| ||||
Try the parallax home page I know that they have stepper motor examples, then you take it from there, you will need to modify the code, also there are plenty of examples on the web, I would recommend 16f877, with pic, do some research and you will find you are already there. |
|
#5
02-09-2008, 12:31 PM
| |||
| |||
| 16f877?whats that? |
| Sponsored Links |
| |
|
#6
02-29-2008, 02:40 PM
| |||
| |||
| can the mach3 send orders through the bs2 to the servos? |
|
#7
06-02-2009, 06:03 PM
| ||||
| ||||
| The 16f877 is a pic microcontroller, an amazing little chip there is already code out that can contoll this chip for x,y,z. google pic 16f877 pic processor it is made by microchip. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stamp engraving | PaioX | Laser Engraving & Cutting Machines | 3 | 10-06-2007 08:26 AM |
| Error message with Basic Stamp 2 editor | Lston | PIC Programing / Design | 0 | 08-07-2007 12:17 AM |
| cnc controlled mandrel bender controlled by mach3 | timmyb199 | Bending, Forging,Extrusion... | 5 | 05-30-2007 07:35 PM |
| Cnc Y Basic Stamp | antares813 | Spanish CNCzone | 2 | 01-31-2007 10:51 PM |
| Basic Stamp to control stepper motors? | phantomcow2 | Stepper Motors and Drives | 3 | 12-04-2005 04:11 PM |
| | |
Linear Mode
