| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| PIC Programing / Design Discuss programing of PIC chips here and design of electronics using PIC chips. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-25-2008, 01:46 PM
| |||
| |||
I ran across this the other day and I think I am going to build it soon. It has a ton of functions from volt meter to cap tester to PWM. It would be increadibly cheap to build (Esp. if you go to microchip.com and get the pic for free) and could be used to test stepper drivers and about everything else. It also outputs a NTSC pattern to test tv's. http://www.mondo-technology.com/ choose SuperProbe on the right hand. Then choose to go to the hall of fame and then go to the spanish one. or just go here http://heli.xbot.es/SuperProbe/SuperProbe.htm but you might have to translate it.    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Probe help | racear*2865 | Mach Mill | 1 | 10-16-2007 02:30 PM |
| Tool Probe Arm | phoodieman | Daewoo/Doosan | 6 | 11-01-2006 04:32 PM |
| CMM probe | sab | Open Source Controller Boards | 3 | 03-07-2006 05:37 AM |
| Building a probe | itsme | Digitizing and Laser Digitizing | 19 | 10-01-2005 12:56 PM |
| Digitising Probe | itsme | TurboCNC | 2 | 06-04-2005 08:19 AM |
| | |
Linear Mode
