| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| PIC Programing / Design Discuss programing of PIC chips here and design of electronics using PIC chips. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-14-2007, 09:02 PM
| |||
| |||
I'mm newbie and have questions regarding PIC16F84 1. PIC 16F84 is easily available here. Can I use PIC 16F84 A instead being hight MHz with Linistepper ? And How? 2. As I cant get geko or something else in my conntry and can't import either, I have to build suitable drives from scratch. So if Linistepper is OK with Joe's CNC as I have old xerosx steppers rated at 2.5,3.25 & 3.35 ? Linistepper Drive Controller 3. How to programme PIC, that is hardware/software and process etc. Thanks P.K.    |
|
#2
10-14-2007, 09:39 PM
| ||||
| ||||
| When I started with PIC's the tutorials on this site helped me alot. http://www.winpicprog.co.uk/pic_tutorial.htm He also has a programming Forum site. I use the K149B programmer from Kitsrus.com. PicMicro site has all kinds of application notes and code, also free development software, the MPlab IDE free download should get you started.
__________________ “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
