Rotary Table Controller debugging.

Results 1 to 1 of 1

Thread: Rotary Table Controller debugging.

  1. #1
    Member
    Join Date
    May 2015
    Location
    Holland
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Rotary Table Controller debugging.

    Hi guys,

    I had to do many deviding table jobs in the past that became more complicated.
    I designed in time a simple all-in-one Standalone Rotary Table Controller to do my work.
    Especially the Next-sensor and Limit-sensor are implemented to prevent damage to my lathe and mill.
    This site "cnczone.com" helped me before with my thread "How to program the formula for decimal degrees when using a rotary table?".
    Thanks for that guys. I solved that problem and added a new mode "Continuous" for gluing and welding purposes. Works fine for me.
    But now a former employer wants 3 of my controllers for his production work!?
    I´m not an expert at all and urge you all to criticise my Rotary Table Controller so I can eliminate all bugs you´ll find, so I can maintain a good reputation I hope

    Here is a picture of the Rotary Head Controller.

    This is a quick overview video link of the controllers recent updated version.

    (Some other video´s have demo´s that shows detailed info if needed use lower right YouTube-icon)

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Rotary Table Controller debugging.-controller-jpg  
    Last edited by Driller2; 12-20-2015 at 10:52 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Rotary Table Controller debugging.

Rotary Table Controller debugging.