| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Phase Converters and VFD Running 3 phase machines on single phase power and variable frequency drive discussion |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-10-2006, 11:01 PM
| |||
| |||
ALLEN-BRADLEY M/N: 160-AA18NP03 BUL.: 160 S/N: 4TAB3TC1 05143 FRN: 7.06 A5EE HP: 7.5 DP 5.5KW INPUT: V200-240 30 AMP: 21.1 HZ: 50/60 VA: 8400 OUTPUT:200-230 30 AMP: 18.0 HZ: 0-240 SHORT CIRCUIT CURRENT: 100 KA This is the information on the back of the vfd,im looking to see if i can run single phase in. but i cant find a manual on this model anywhere.hopefully someone knows where ican find it. thanks mike    |
|
#2
10-10-2006, 11:02 PM
| ||||
| ||||
| Did you try the Rockwell site? Al.
__________________ “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
10-10-2006, 11:39 PM
| |||
| |||
yes i tried the rockwell site but couldnt find it.maybe im just looking in the wrong spot,i dont know.i was on there looking forever and couldnt come up with anything. |
|
#5
10-11-2006, 10:17 PM
| ||||
| ||||
| There is a limited amount of information here http://www.ab.com/catalogs/e114/160_30.pdf And here http://www.ab.com/drives/160c/ Al.
__________________ “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
