KB-electronics KBCC-225R

[gotis]

Hello!

Just got a KBCC-225R DC-speedcontrol and the horsepowerresistor is missing.
The manual says that the value should be ,01 Ohms.

Question: can´t I just put a jumper instead?

I was planning to use it driving a 2hp treadmill motor for my spindle.
http://www.kbelectronics.com/manuals/kbcc.pdf

[Al_The_Man]

If you jumper it you won't have overcurrent sensing, you could fuse it a bit tighter to protect for any overcurrent.
Do you not have any KB suppliers in Sweden? These items are very easy to get here.
Other than that its just a 10watt resistor with a couple of pins on it.
Al.

[gotis]

Originally Posted by Al_The_Man If you jumper it you won't have overcurrent sensing, you could fuse it a bit tighter to protect for any overcurrent. Do you not have any KB suppliers in Sweden? These items are very easy to get here. Other than that its just a 10watt resistor with a couple of pins on it. Al.

I hear you, better find that horsepowerresistor,
actually I found 2 suppliers.

Thanks Al.