Huanyang VFD Inverter all available Error Codes

[Saintstone]

When i googled my shop,i found this forum and found some guys discuss the error code of the HuanYang VFD Inverter.I have a update english manual.It's 15Mb,so i can't upload it here.I will upload the error code parts this time,hope to help more guys understand your inverter.

China is developing now and will be stronger and powerful ,just as the Japan in 1980years.Our products has some defects and not perfact now.That means we still have many potential in improving the quality. During the next 10 years,everyone will see many reliable and perfect Chinese products.

HuanYang Inverter is good quality,but worse in the propaganda.If you guys can submit your advice,it can help HuanYang improve their products,and then it can offer more suitable inverter for you. Large power inverter can be available now,such as 30KW(40HP).

I believe that a nation which have built the fastest super-computer and the CRH380AL bullet train will improve the products. Though it will take us some decades to catch up the german and japan products in general.,it will come one day!I believe it!

[Saintstone]

The correct sequence of attached files should be 2,3,1 in read.(error code2,error code 3,error code 1). If the error code of your HuanYang inverter is not found,please contact the seller to return back for repairing. The manufacturer will be responsible！

We offer spindle motors 1.5KW/2.2KW/3KW/4KW etc. Please inquire us!

[sqcbcnc]

Originally Posted by Saintstone When i googled my shop,i found this forum and found some guys discuss the error code of the HuanYang VFD Inverter.I have a update english manual.It's 15Mb,so i can't upload it here.I will upload the error code parts this time,hope to help more guys understand your inverter. China is developing now and will be stronger and powerful ,just as the Japan in 1980years.Our products has some defects and not perfact now.That means we still have many potential in improving the quality. During the next 10 years,everyone will see many reliable and perfect Chinese products. HuanYang Inverter is good quality,but worse in the propaganda.If you guys can submit your advice,it can help HuanYang improve their products,and then it can offer more suitable inverter for you. Large power inverter can be available now,such as 30KW(40HP). I believe that a nation which have built the fastest super-computer and the CRH380AL bullet train will improve the products. Though it will take us some decades to catch up the german and japan products in general.,it will come one day!I believe it!

Saintstone,
you must be working there, and I agree with you, that Chinese products are not allways 'bad'.
Between 1985-1995 I've imported computer components from Taiwan, as the rest of the world did and still does, the main problem was newer the quality, but the bad manual translations, due to which some products were hard to setup, excuse me for the comparisson, but in those day I gave it a name - Chinese English...
During 1995-1998 I imported Chinese weapons, and I must say that I'm impressed by their quality, no problems there and also no problems with manuals / translations, no manuals needed with that.
So I believe in your enthousiasm, Chinese products can certainly compete on the market, and as far as I'm concerned they may need some minor tuning in the field of readable manual or better quality controll, but that's about it, for the rest it's OK.
Would you be so kind to place a link to your shop, so I can check what you have to offer?
Best regards,
Jerry

[Saintstone]

Hi sqcbcnc, Many thanks for your reply and understand!
My first shop is sonic-2009r,there is little listing due to ebay's restriction.This is my another shop link: amazing-2009a items - Get great deals on optic power meter, Fiber optic tool tool kit items on eBay Stores! . There are many things not listed on ebay due to the quantity limitation from ebay.

We offer cnc products such as this:
Water-Cooled Spindle motor and matched VFD inverter(HuanYang).
Air-cooled spindle and endmill/ER11/20/25 collets/ER Span etc.
Linear motion Ball Bearings/Ball Bushing/shaft supported units(ordinary and flange type)/Rails etc. I will attach some photos about our products.

Actually We also offer many things related with "Ic",from PCB Manufacture service,Adapter,programmer,soldering tool/desoldering tools such as hot gun, BGA Rework station!

[NZCNC]

Dear Sir
I have one of the Chinesse Spindles and are having issues I would appreciate if you could forward me the manual you have on file and also the copy of the error codes so we can sort it out my emal is tim.alci@yahoo.com

Regards\\

And thankyou in advance

[Saintstone]

I can't upload it to cnczone,so i sent you a letter.Wish you can have a try.

[DIETEKMFG]

Originally Posted by Saintstone I can't upload it to cnczone,so i sent you a letter.Wish you can have a try.

could you do me a favor and please email this manual to my attention aswell? been trying to email manufacturing company to get a hold of english copy but ive had no luck.

thanks in advance

tooldiemfg@yahoo.com

[Saintstone]

Email has sent,please check it.

[dandoz]

Hi Saintstone, Could you do me a favor and please email this manual to my attention aswell?
My email is dandoz@hotmail.com
Thanx very much

[jhovel]

Saintstone sent me the VFD manual in PDF format - and I was able to reduce it's size a little to just over 10MB. This is still to large for e-mails to most people's accounts, but if someone has storage space - and Saintstone agrees!? - I could upload it there.

Please note that I'm in the process of editing the manual to correct the language and grammar. There are a number of areas with incorrect and inconsistent uses of terminology in the text which make it very difficult to read and follow. The final result should make this a much more useful manual for all of the English speaking folk in CNC/VFD circles.

BTW, I have ourchased a sigle-phase 220V 1.5kW version of the Huanyang VF and so far I'm very happy with it. One of my "ordinary" 2-pole 3-phase motors is happy to run at around 10,000 rpm (175Hz) all the others pike at about 110Hz.

What makes a motor accept higher frequencies? Can someone please enlighten me? E.g. what allows the 400Hz spindles run at this high frequency and other motors not?

Cheers,
Joe in Australia

[AMITSHARMA2904]

Hi dear,

Wonderful to see the error details as I was finding myself entangled in the middle of nowhere.Friend I have had purchased one 3KW spindle from one Chinese supplier along with its maching inverter i.e 3KW huanyang.
The problem after setting the PD-05,04,03,072 to 400 & PD-144 to 3000 and pushing the run button-after some fast turns it stops and shows the ELuA,ELu5 & ELun error codes which are meant for LOW VOLTAGE where as the voltage supplied is 240v for which I have set PD08-240V single phase but still same.(My VFD is 220V three ph./single phase
Please help what values should be programmed.
My mail id is amitsharma2904@gmail.com.

Best Regards//AMit

[Silversage43]

I powered up the spindle and got this error, can not find it in the pdf manual i got with cnc, any help? I tried restoring factory defaults and still no just. It spun for about .1 seconds then stopped. It has not moved since

thanks as i'm new to this, everything else ready to go on cnc, but VFD!