I would expect it to be the same as the ones sold in the UK. So the same as mine. Mine is a V2. Glancing at the pdf's for the electrical stuff it doesn't look that easy.
All the motors are 200V [or therabouts] 3 Ø.
The spindle inverter needs all three phases.
The servo power supply needs all three phases.
The servo drives have all three phases connected to them.
The lubrication pump is 3Ø.
I have all the manuals. I did photograph the wiring digrams for someone.
I put the pics ONLINE. I have all the Yaskawa pdf's, but they are fairly easy to find if you stick the part numbers into google.
I am refitting mine. I guess you will be able to use a rotary phase converter.