Alright guys, here's my story:
Got a smoking deal on a 96' TC22 ($2,000). Pop open the panel and find out that it's already been upgraded sometime around 2011 with a MOD (SSD) and the electronics are all super clean.
Now the Bad: The Utility wants $50K to run 3 phase the 5 miles out to the farm. No Deal.
I've read and re-read this thread from 2014: http://www.cnczone.com/forums/phase-...53132-cnc.html
I pretty much understand that I'd be running one 110 to L2 and then splitting the second 110 between L1 and 4L3 (jumped upstream of both fuses/breakers).
My machine is pretty much the same as dbtoutfit, except that I have breakers ("A-B Quality" H-series) instead of fuses.
Other than disconnecting the "T" terminal in my VFD (Yaskawa 626 VM3C)
What else do I need to modify so I don't melt the expensive stuff BP doesn't make anymore?
BTW: 4th Axis is in this machines future.
Thx everybody!
Similar Threads:
- Need Help!- 220V single phase VFD 3 phase output for powering a 200V 3phase AC Servo drive/motor
- Robodrill 7.5hp spindle. Single Phase Power input No Rotary Phase convetor doable?
- driving a single phase capacitor start/run motor from three phase vfd or power grid.
- Need Help!- how to connect single phase spindle motor with 3 phase inverter
- fitting a 110v or 220v single phase spindle motor on a 3 phase machine
Bridgeport TC-22, Landis 1-1/2, RF-45