Hi All,

my PI8600 shows the following at startup

EoCP

which is apprantly an Error Over Current Protection

I have used the following User Manual

http://alis.kms-bg.com/catalogue/PI8600manual.pdf

Still it is very hard to understand what to do. It seems that you have to "confirm" the alarm in order to proceed but I can't find what the confirm sequence is. It seems that the red button allows you to reset/confirm the alarm but how this is achieved is not really well documented


Right now the VFD stays in this mode which prevents it from being used in normal operations at all .

Any help is therofor greatly appriciated!

Thanks

Similar Threads: