- Huanyang inverter PD settings
-
Member
Huanyang inverter PD settings
I have bought the 4kw inverter form huanyang power my car lift which is 3 phase with a 3 KW motor, To be honest it was all quite easy to wire and athough the default figures were not what was specified in the instruction manual ive changed the ones i feel relevant.
Problem is the inverter will run the lift fine apart from when i try to lift a car, My CRX is only 950kg and the motor gradually gets slower the further the car suspension goes up while trying to lift until its obviously going to stop so i havent pushed it as i dont want to blow anything up.
I think my only solution would be to make a gearbox to run up the gearing as is currently 3.85:1.
But i would like to make sure that theres nothing i have missed in the VFD settings which would give me a bit more torque.
Heres the settings.
Similar Threads:
-
-
Registered
pd003 - pd005 set to 60, pd014 is the ramp up time it should be shorter 1 to 3 maybe
-
Registered
My bad, you're in England. Keep the 50 Hz but change the ramp. You are waiting 30 seconds for the motor to ramp up to is set speed.
- Huanyang inverter PD settings
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules