Results 1 to 3 of 3

Thread: Grizzly 110 Volt lathe

  1. #1

    Default Grizzly 110 Volt lathe

    I have a 1 hp Grizzly Lathe G9972. For starters I would like to add a VFD to this. The motor is 110 volt 1 phase 15 amp dealie. It's also a capacitor start. Will that pose a problem? I need something that will alleviate the time wasted by having to change belts between drilling to turning to cut off operations. I also need something that will later on be able to be integrated with a 3 axis system when I go all out CNC with this lathe. I also need a stepper system if anyone has one in mind. I need like a Nema 43 system that I can integrate with my computer. I am also clue less as to how to do this integration VFD 2 axis control and when it comes to it turret control. I was planning on buying one of those systems from Ebay but have no idea how those things integrate.

    Similar Threads:


  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    20577
    Downloads
    0
    Uploads
    0

    Default

    Capacitor start 1ph motors do not run that well on VFD's even ones that are designed for such.
    They drop out of run at the lower rpm's.
    You are better off either replacing with a 3 phase motor and VFD, or fitting a DC motor and SCR drive.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  3. #3
    Registered
    Join Date
    Apr 2005
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    What would be a better choice a 3 phase motor and VFD, or fitting a DC motor and SCR drive?



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed